NOTE: Semaphores & db load balancer aren't covered by the tests.
IMPORTANT: All testing is made on In-Portal 5.2.x unless noted otherwise.
# Part 0 - Prepare In-Portal 5.2.2-B2
# in the phpMyAdmin:
# prepare an empty database (create empty OR clear existing) to be used during the install
# in the Terminal (SSH connection to Web Server)
# go to the DocumentRoot folder of the Web Server
# run the `svn co svn://user@in-portal.org/in-portal/releases/5.2.2-B2 in-portal.522b2` command (replace `user` with your In-Portal SVN Server username) to perform an SVN Checkout
# switch to the just created `in-portal.522b2` folder
# run the `php tools/configure_profile.php in-portal.full` command to update `svn:externals` property
# run the `svn update` command to checkout missing modules/themes
# (in IDE) change value of the "name" key in the "/composer.json" file from "In-Portal" to "intechnic/in-portal"
# run the `composer update` command to create a `vendor` folder
# run the `tools/fix_perms.sh` command to fix permissions of the `system` folder
# run the `cp tools/debug_sample.php system/debug.php` to create a debug file
# in IDE (for In-Portal 5.2.2-B2 installation):
# open `/system/debug.php` file for editing
# update `$dbg_options['DBG_IP']` key as needed (add your IP address for Debug Mode to be enabled)
# uncomment the `DBG_CURL` constant definition
# save changes
# copy `/index.php` file into `/curl_test.php` file
# open `/curl_test.php` file for editing
# replace `$application->Run();` line with `$application->recallObject('CurlHelper')->Send('https://www.google.com');` code
# save changes
# in the Web Browser:
# go the URL, that matches SVN checkout folder
# click on the link that recommends to perform installation
# perform In-Portal installation:
* with all the modules
* with advanced theme set as primary
* with System Log enabled
# open the `curl_test.php` file
# (in the phpMyAdmin) confirm, that the `CurlLog` table isn't empty (record is present about cURL request)
# login to the Admin Console
# go to the {nav Logs & Reports > System Log} section
# confirm, that grid isn't empty (the record is present about "InstallFinished" system setting)
# go to the {nav E-commerce > Sales Report} section
# run any report
# (in phpMyAdmin) confirm, that `522b2_ses_NNN_SaleReport` table was created (`522b2_` is table prefix; `NNN` is session key)
# go to the {nav Configuration > Website > Advanced} section
# enable the `Track database changes to change log` and save changes
# re-logout to the Admin Console
# go to the {nav Logs & Reports > Session Log} section
# confirm, that grid isn't empty (record about current session is present)
# open editing of any record, that will cause temp table to be created, but don't close the editing popup/modal window
# (in the phpMyAdmin) confirm, that temporary tables were created for unit, that is edited
# remember your SID from `adm_sid` cookie
# in the Web Browser
# go to the Front-End
# perform any search requery
# in phpMyAdmin
# confirm, that `522b2_ses_NNN_522b2_Search` table was created (`522b2_` is table prefix; `NNN` is session key)
# remember how temporary tables/sales report tables/search tables are named (SID in the table name)
# remember SID usage in the `UserSessions`, `UserSessionData`, `UserSessionLogs`, `CurlLog`, `SystemLog` tables
# backup the database in case if something wents wrong with an upcoming upgrade and it needs to be repeated
# Part 1 - Testing Upgrade (for In-Portal 5.2.x installation)
# in IDE:
# apply patches from the D477 and D476
# backup `/system/config.php` and `/system/debug.php` files
# replace `/system/config.php` and `/system/debug.php` files with their counterparts from the In-Portal 5.2.2-B2 installation
# open `/system/config.php` file for editing
# change `$_CONFIG['Misc']['WebsitePath']` to represent In-Portal 5.2.x installation path
# save changes
# in Web Browser
# open the `/core/install.php` URL
# (in phpMyAdmin) remember row count of the `UserSessionLogs` table
# proceed with the upgrade
# (in phpMyAdmin) confirm, that no new rows were created in the `UserSessionLogs` table during the upgrade
# login to the Admin Console
# in the Debugger Report search for the "Session Key: ..." line and remember that session key
# change `adm_sid` and `adm_sid_live` cookie value into previously (before upgrade) recorded (see prev. test part)
# reload the page (frameset)
# confirm, that you're still logged in
# open the Debugger Report
# confirm, that `Session Key: ..." line shows different value, than before (proves, that active sessions in the old format were upgraded and remain active)
# in phpMyAdmin:
# confirm, that temporary tables/sales report tables/search tables are property renamed (SID is replaced with Session ID)
# confirm, that SID usage in the `UserSessions`, `UserSessionData`, `UserSessionLogs`, `CurlLog`, `SystemLog` tables was replaced with it's hash
# Part 2 - Temp tables
```
lang=php, name=/admin/temp_test.php (fragment)
$live_table = TABLE_PREFIX . 'Categories';
$temp_table = $application->GetTempName($live_table);
$is_temp_table_true = $application->IsTempTable($temp_table);
$is_temp_table_false = $application->IsTempTable($live_table);
$live_table_rebuilt1 = $application->GetLiveName($temp_table);
$live_table_rebuilt2 = $application->GetLiveName($live_table);
echo 'LT: ' . $live_table . '<br/>' . PHP_EOL;
echo 'TT: ' . $temp_table . '<br/>' . PHP_EOL;
echo 'TTT: ' . ($is_temp_table_true ? 'OK' : 'FAILED') . '<br/>' . PHP_EOL;
echo 'TTF: ' . (!$is_temp_table_false ? 'OK' : 'FAILED') . '<br/>' . PHP_EOL;
echo 'LTR1: ' . ($live_table_rebuilt1 === $live_table ? 'OK' : 'FAILED') . '<br/>' . PHP_EOL;
echo 'LTR2: ' . ($live_table_rebuilt2 === $live_table ? 'OK' : 'FAILED') . '<br/>' . PHP_EOL;
```
# in Web Browser
# perform the clean install
# login to the Admin Console
# go to {nav Configuration > Advanced} section
# change value of the `Editing Window Style` system setting to the `Popup Window`
# save changes
# reload the whole frameset
# in IDE:
# copy/paste `/admin/index.php` file into `/admin/temp_test.php` file
# replace `$application->Run();` line with the above shown code fragment
# save changes
# in Web Browser
# open `/admin/temp_test.php` file
# confirm, that:
* first test shows valid LIVE table name
* second test shows valid TEMP table name
* other 4 tests show `OK`
# (in phpMyAdmin) confirm, that no temporary tables for given admin session are present
# press `Add` toolbar button to open 1st new record creation popup
# return back to the main window
# press `Add` toolbar button to open 2nd new record creation popup
# (in phpMyAdmin) confirm, that:
* 2 sets of temporary tables for these actions were created
* they have session_id instead of session_key in their names
# close one of the editing windows using an X icon in top right corner of the window
# wait 2 seconds
# (in phpMyAdmin) confirm, that 1 set of temporary tables for the closed window was removed
# Part 3 - Debugger
NOTE: Debugger must be enabled before performing this test.
# in Web Browser:
# go to the Admin Console
# open any grid to trigger debug report file generation (but don't open debugger report)
# in IDE:
# open the `/system/.restricted` folder
# confirm, that some debugger report files are in the new format (`debug_@SID_HASH@.txt`) instead of (`debug_@SID@.txt`)
# create an empty `/system/.restricted/debug_@fake_sid@.txt` file
# (in CLI) run the `php tools/run_event.php adm:OnOptimizePerformance b674006f3edb1d9cd4d838c150b0567d` command
# confirm, that:
* `/system/.restricted/debug_@fake_sid@.txt` file was removed
* `/system/.restricted/debug_@*@.txt` files belonging to non-existing/expired sessions were removed
# Part 4 - cURL
# in IDE:
# open `/system/debug.php` file for editing
# uncomment the `DBG_CURL` constant definition
# save changes
# copy `/index.php` file into `/curl_test.php` file
# open `/curl_test.php` file for editing
# replace `$application->Run();` line with `$application->recallObject('CurlHelper')->Send('https://www.google.com');` code
# save changes
# in Web Browser
# open the `/curl_test.php` file
# (in the phpMyAdmin) confirm, that:
* the `CurlLog` table isn't empty
* the `CurlLog.SessionKey` column contains SID hash (as see in the `UserSessions.SessionKey` column)
# Part 5 - Sub-item grid filters in temp table
# in the Web Browser
# go to Admin Console
# go to {nav Website & Content > Polls} section
# press the `Add` toolbar button
# fill-in required fields on the `General` tab (in popup, that opens)
# go to the `Answers` tab
# add one answer
# try searching in the `Answer` column (no column title) for something, that is present in the answer
# confirm, that that something is found
# try searching in the `Answer` column (no column title) for something, that isn't present in the answer
# confirm, that that nothing is found
# Part 6 - System Log
# in the Web Browser
# go to Admin Console
# go to {nav Website & Content > Polls} section
# press the `Add` toolbar button
# press `Save` toolbar button without filling-in the required fields
# confirm, that you see a validation error
# press the `Cancel` toolbar button
# go to {nav Logs & Reports > System Log} section
# open system log record, that was created after the validation error
# confirm, that `Session Key` shows SID hash (as see in the `UserSessions.SessionKey` column)
# Part 7 - Sales Report
# in the Web Browser
# go to {nav E-commerce > Sales Report} section
# run the report with any valid values
# confirm, that you're seeing a grid
# (in phpMyAdmin) confirm, that `522b2_ses_1_SaleReport` table was created (`522b2_` is table prefix; `1` is session id)
# Part 8 - Front-End search
# in the Web Browser
# go to Front-End
# try searching for anything
# (in phpMyAdmin) confirm, that `522b2_ses_1_522b2_Search` table was created (`522b2_` is table prefix; `1` is session id)
# Part 9 - Session Logs
# in the Web Browser
# go to Admin Console
# go to the {nav Configuration > Website > Advanced} section
# enable the `Track database changes to change log` and save changes
# re-logout to the Admin Console
# go to the {nav Logs & Reports > Session Log} section
# confirm, that grid isn't empty
# confirm, that `Session Key` column is visible
# (phpMyAdmin) confirm, that record created in the `UserSessionLogs` table has `SessionId` and `SessionKey` column values, that match with an existing session from the `UserSessions` table
# Part 10 - Session itself
```
lang=php, name=/admin/session_test.php (fragment)
echo 'T1: ' . ($application->Session->GetField('NonExistingField') === false ? 'OK' : 'ERROR') . '<br/>' . PHP_EOL;
echo 'T2: ' . ($application->Session->GetField('TimeZone') === '' ? 'OK' : 'ERROR') . '<br/>' . PHP_EOL;
$application->Session->SetField('TimeZone', 'Europe/London');
echo 'T3: ' . ($application->Session->GetField('TimeZone') === 'Europe/London' ? 'OK' : 'ERROR') . '<br/>' . PHP_EOL;
$application->Session->SetField('TimeZone', null);
echo 'T4: ' . ($application->Session->GetField('TimeZone') === null ? 'OK' : 'ERROR') . '<br/>' . PHP_EOL;
```
# in the Web Browser
# go to Admin Console
# (in IDE) delete all the debugger report files from the `/system/.restricted` folder
# click on any page
# (in IDE) confirm, that debugger report file was created
# (in phpMyAdmin) confirm, that records in `UserSessions` and `UserSessionData` tables for current session are present
# perform logout
# (in IDE) confirm, that debugger report for the just logged out session was deleted
# (in phpMyAdmin) confirm, that records in `UserSessions` and `UserSessionData` tables for just logged out session were deleted
# perform logout
# (in IDE) replace `$application->Run();` line in `/admin/index.php` file with `$application->GetSID(Session::PURPOSE_REFERENCE);` and save changes
# reload the page
# confirm, that an exception is thrown (in Debugger Report) about non-existing session and it shows it's session key
# (in IDE) rollback changes to the `/admin/index.php` file and save changes
# login to the Admin Console
# in IDE:
# copy/paste `/admin/index.php` file into `/admin/session_test.php` file
# replace `$application->Run();` line with the above shown code fragment
# save changes
# in Web Browser
# open `/admin/session_test.php` file
# confirm, that: all 4 tests show `OK`
# Part 11 - parallel editing
# in the Web Browser
# go to Admin Console
# go to {nav Website & Content > Structure & Data > Directory} section
# click on the `Links` tab
# create one record in that grid
# open that record for editing
# return back to main window
# open that record for editing again
# confirm, that you're seeing an alert indicating, that this record is already being edited
# Part 12 - session logout on user disapproval
# in the Web Browser
# go to Admin Console (tab 1)
# go to {nav User Management > Users} section
# create a user
# go to Front-End (tab 2)
# login using that user
# go to Admin Console (tab 1)
# deactivate just created user using Disable button from the grid
# go to Front-End (tab 2)
# reload the page
# confirm, that you're no longer logged-in on the Front-End