Plan 0 (install/upgrade)

1. perform clean install
2. login to Admin Console
3. go to Configuration → Users → General section
4. confirm, that Editing Window Manager Ping Interval system setting is present there
5. perform an upgrade
6. login to Admin Console
7. go to Configuration → Users → General section
8. confirm, that Editing Window Manager Ping Interval system setting is present there

Part 1 (popup duplicate reporting)

1. login to Admin Console in Web Browser A
   1. set Editing Window Style to Popup Window and save changes
   2. reload whole frameset (Command+R on Mac, F5 on Windows)
   3. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
   4. ensure, that at least 2 records are present
   5. open 1st record for editing
   6. confirm, that duplicate editing window isn't shown
   7. while keeping editing popup open try opening 1st record for editing again
   8. confirm, that you're faced with an alert window explaining duplicate editing issue
   9. close 2nd edting window (where alert dialog was shown)
2. login to Admin Console in Web Browser B
   1. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
   2. open 1st record for editing
   3. confirm, that you're faced with an alert window explaining duplicate editing issue

Part 2 (modal duplicate reporting)

1. login to Admin Console in Web Browser A
   1. set Editing Window Style to Modal Window and save changes
   2. reload whole frameset (Command+R on Mac, F5 on Windows)
   3. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
   4. ensure, that at least 1 record is present
   5. open 1st record for editing
   6. confirm, that duplicate editing window isn't shown
2. login to Admin Console in Web Browser B
   1. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
   2. open 1st record for editing
   3. confirm, that you're faced with an alert window explaining duplicate editing issue

Part 3 (temporary table removal)

1. login to Admin Console
2. set Editing Window Style to Modal Window and save changes
3. reload whole frameset (Command+R on Mac, F5 on Windows)
4. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
5. ensure, that at least 1 record is present
6. open 1st record for editing
7. confirm, that temporary tables were created in the database
8. close editing window using X icon (in the top right/left corner of the window; not the toolbar buttons)
9. wait 2 seconds (AJAX request for window closing is executed after 2 seconds)
10. confirm, that temporary tables were removed from the database
11. repeat this plan part, but with Editing Window Style set to Popup Window and save changes

Part 4 (editing of several records)

1. login to Admin Console in Web Browser A
   1. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
   2. ensure, that at least 3 records are present
   3. open 1st and 2nd records record for editing
   4. confirm, that duplicate editing window isn't shown
2. login to Admin Console in Web Browser B
   1. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
   2. open 1st record for editing
   3. confirm, that you're faced with an alert window explaining duplicate editing issue
   4. close this editing window
   5. open 1st and 3rd record for editing
   6. confirm, that you're faced with an alert window explaining duplicate editing issue
   7. close this editing window

Part 5 (tracking system doesn't extend session)

1. login to Admin Console
2. locate used Session ID (debugger or cookies)
3. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
4. open any link for editing
5. remember UserSessions.LastAccessed value for above remembered session id
6. open Web Browser Inspector window on a Network tab
7. wait until AJAX request to "OnTrackEditingWindowAJAX" event is made
8. confirm, that UserSessions.LastAccessed value wasn't changed for above remembered session id

Plan 6 (duplicate record window tracking)

1. login to Admin Console
2. locate used Session ID (debugger or cookies)
3. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
4. open any link for editing
5. open the same link for editing again (without closing any previously opened editing windows)
6. open the same link for editing again (without closing any previously opened editing windows)
7. confirm, that for each of the editing windows there is:
   • a matching set of the temporary tables in the database
   • a matching record in the EditingWindowManager memory table
8. close 3rd opened editing window via Cancel toolbar button
9. confirm, that both editing tables and a record from the EditingWindowManager memory table were removed
10. close 2nd opened editing window via red X button of the window itself (not in the HTML)
11. confirm, that both editing tables and a record from the EditingWindowManager memory table were removed
12. close 1st opened editing window

Plan 7 (new record tracking)

1. login to Admin Console
2. locate used Session ID (debugger or cookies)
3. go to Website & Content → Structure & Data section, then Directory sub-category, then Links tab
4. open a new link creation popup/modal window
5. confirm, that for an adding window there is:
   • a matching set of the temporary tables in the database
   • a matching record in the EditingWindowManager memory table
6. close opened adding window via red X button of the window itself (not in the HTML)
7. confirm, that both editing tables and a record from the EditingWindowManager memory table were removed