Part 1 (Clean Install)

• in Web Browser:
  1. peform a clean install
  2. while on the System Configuration installation step confirm, that:
     • the Include Web Request data in "System Log" setting is visible and is enabled
     • the Largest Web Request/Session Size, that will be saved in "System Log" setting is visible and has 5MB value
     • disable the Include Web Request data in "System Log" setting
     • set 5KB in the Largest Web Request/Session Size, that will be saved in "System Log" setting
     • proceed to the next step
• in the IDE:
  1. open the /system/config.php file
  2. confirm, that it has these lines:

$_CONFIG['Misc']['SystemLogIncludeRequestData'] = '0';
$_CONFIG['Misc']['SystemLogRequestDataLimit'] = '5KB';

Part 2 (Upgrade)

• in Web Browser:
  1. upgrade from any previous In-Portal version (e.g. In-Portal 5.2.2-B1)
  2. while on the System Configuration installation step confirm, that:
     • the Include Web Request data in "System Log" setting is visible and is enabled
     • the Largest Web Request/Session Size, that will be saved in "System Log" setting is visible and has 5MB value
     • disable the Include Web Request data in "System Log" setting
     • set 5KB in the Largest Web Request/Session Size, that will be saved in "System Log" setting
     • proceed to the next step
• in the IDE:
  1. open the /system/config.php file
  2. confirm, that it has these lines:

$_CONFIG['Misc']['SystemLogIncludeRequestData'] = '0';
$_CONFIG['Misc']['SystemLogRequestDataLimit'] = '5KB';

• in Web Browser:
  1. login to Admin Console
  2. go to the Configuration → Website → Advanced section
  3. confirm, that:
     • the Keep Request Data in "System Log" for system setting is present
     • has value of 1 month set in the dropdown

Part 3 (Setting change)

1. login to Admin Console
2. go to the Configuration → Website → Advanced section
3. confirm, that:
   • the Keep Request Data in "System Log" for system setting is present
   • has value of 1 month set in the dropdown
4. set value for the Keep "System Log" for system setting to 1 month
5. set value for the Keep Request Data in "System Log" for system setting to 2 weeks
6. save changes
7. confirm, that changes were saved
8. set value for the Keep Request Data in "System Log" for system setting to 3 months
9. save changes
10. confirm, that changes were not saved and the error message was shown

Part 4 (Adding Fixtures)

• in IDE
  1. open the `` file for editing
  2. add this code at the beginning of the \UsersEventHandler::SetCustomQuery method:

$log = $this->Application->log('test message (default request/session data)', 123);
$log->setLogLevel(kLogger::LL_ERROR);
$log->write();

$log = $this->Application->log('test message (force add request data)', 124);
$log->setLogLevel(kLogger::LL_ERROR);
$log->addRequestData();
$log->write();

$log = $this->Application->log('test message (force remove request data)', 125);
$log->setLogLevel(kLogger::LL_ERROR);
$log->removeRequestData();
$log->write();

$log = $this->Application->log('test message (force add session data)', 126);
$log->setLogLevel(kLogger::LL_ERROR);
$log->addSessionData();
$log->write();

$log = $this->Application->log('test message (force remove session data)', 127);
$log->setLogLevel(kLogger::LL_ERROR);
$log->removeRequestData();
$log->write();

Part 5 (Auto Logging Disabled)

• in IDE:
  1. open the /system/config.php file
  2. change SystemLogIncludeRequestData setting to 0
  3. change SystemLogRequestDataLimit setting to 5KB
  4. save changes
• in the Admin Console:
  1. go to the User Management → Users section
  2. go to the Logs & Reports → System Log section
  3. confirm, that among 5 newly created records with following properties:
     • message: test message (default request/session data) + no request data + no session data
     • message: test message (force add request data) + request data + no session data
     • message: test message (force remove request data) + no request data + no session data
     • message: test message (force add session data) + no request data + session data
     • message: test message (force remove session data) + no request data + no session data

Part 6 (Auto Logging Without Limits)

• in IDE:
  1. open the /system/config.php file
  2. change SystemLogIncludeRequestData setting to 1
  3. change SystemLogRequestDataLimit setting to 5MB
  4. save changes
• in the Admin Console:
  1. go to the User Management → Users section
  2. go to the Logs & Reports → System Log section
  3. confirm, that among 5 newly created records with following properties:
     • message: test message (default request/session data) + request data + session data
     • message: test message (force add request data) + request data + session data
     • message: test message (force remove request data) + no request data + session data
     • message: test message (force add session data) + request data + session data
     • message: test message (force remove session data) + request data + no session data

Part 7 (Auto Logging With Limit)

• in IDE:
  1. open the /system/config.php file
  2. change SystemLogIncludeRequestData setting to 1
  3. change SystemLogRequestDataLimit setting to 1500
  4. save changes
• in the Admin Console:
  1. go to the User Management → Users section
  2. go to the Logs & Reports → System Log section
  3. this is cut off message format (used below): The %d bytes (%d elements) of data not logged, because it is larger, than %d bytes limit.
  4. confirm, that among 5 newly created records with following properties (when data is logged, then at least 1 of the request data/session data must have system-log-error array key with the cut off message similar to the above-shown):
     • message: test message (default request/session data) + request data + session data
     • message: test message (force add request data) + request data + session data
     • message: test message (force remove request data) + no request data + session data
     • message: test message (force add session data) + request data + session data
     • message: test message (force remove session data) + request data + no session data

Part 8 (Rotation)

• in the database:
  1. open SystemLog table for editing
  2. pick any 2 records, that have both request data & session data present
  3. for 1 of the above records change LogTimestamp to be above 1 week from now on (the strtotime('-2 weeks'); PHP code will produce that timestamp)
• in the Admin Console:
  1. go to the Logs & Reports → System Log section
  2. open 2 above-picked system log record for editing
  3. confirm, that they both have request data & session data
  4. go to the Configuration → Website → Advanced section
  5. set the Keep Request Data in "System Log" for system setting to the 1 week
  6. save changes
  7. go to the Configuration → Website → Scheduled Tasks section
  8. confirm, that the scheduled task with rotate_system_log_request_data name is present
  9. run the scheduled task with rotate_system_log_request_data name is present
  10. go to the Logs & Reports → System Log section
  11. confirm, that from 2 above-picked records:
      • record with newer LogTimestamp retained it's request data & session data
      • record with patched LogTimestamp lost it's request data & session data

Part 9 (CLI not logged)

• in IDE:
  1. open the /system/config.php file
  2. change SystemLogIncludeRequestData setting to 1
  3. change SystemLogRequestDataLimit setting to 5MB
  4. save changes
  5. open the /tools/cron.php file
  6. replace the $application->EventManager->runScheduledTasks(true); line with the

$log = $application->log('test message (default request/session data + cron)', 221);
$log->setLogLevel(kLogger::LL_ERROR);
$log->write();

• 1. save changes
• in CLI:
  1. run the php tools/cron.php
• in the Admin Console:
  1. go to the Logs & Reports → System Log section
  2. confirm, that system log record with test message (default request/session data + cron) message was created
  3. confirm, that the above record don't have (even empty array) request & session data present